Recent content by EvilJ

Hi everyone again, So I'm in the process of renovating my dining room and this involved removing two metal mesh formers that used to form a curved arch between this room and the kitchen extension. This former had been plastered over by the previous owners on the kitchen extension side and...

Sure. It's not very clear though.

Hi everyone. I just finished building a built in wardrobe in one of our bedrooms which is basically a stud wall lined with plasterboard. I skimmed the outside of it with multifinish but still have one very small join to cover on the inside of the wardrobe and am wondering what my best options...

Yes it is. I was thinking of using a angle grinder to cut it flush but am not sure what to fill the void with. The pipe is roughly an inch in diameter. Also would I need to bond the brick wall with PVA before applying the bonding? If so what strength should I use?

Hi all, We recently had our boiler replaced and all the old pipework ripped out which included boxing around one side of the chimney breast. When the boxing was removed it left a bit of damage on the corner of the plasterwork, see picture below. Also part of the wall hasn't been given...

Hi everyone, I made a thread yesterday about my leaking shower but upon closer inspection and talking to the other half the situation has changed. My shower is leaking in at least 3 places. All are in the corners of the shower. I've taken a few pictures to help you guys assess the...

Hi everyone, This is my first post and would really appreciate some words of wisdom on my problem. We moved into our house over 3 years ago and since I can remember we have been having very small puddles appearing on the other side of the shower walls. We didn't install the shower tiling...