Thanks for the link. I have run some searches which suggest that it may take up to 3 days to 'clean' a system that was non-powerflushed.
I guess as there is no maximum time and the spec. sheet suggests that it can protect against corrosion implies I can just leave it in.
Cheers
Mark
Hi Guys,
I ham building up to having my boiler changed by taking some old rads off and flushing out all the sludge etc. I have just dosed the system with Sentinel X800 Jetflo and I was wondering how long I can leave this in the system. I realise that it will have done whatever it is going...
Yes - thanks for checking! had a few practices on some scrap and I am really impressed with the crimps - so much easier than terminal blocks. Why are they not used more routinely?
Cheers
Mark
Thanks B-A-S!
That's why I was asking for a sanity check as the searches I ran came up with using connectors mixed views on which connectors to use! I thought I would ask the experts!
Anyway just to say the crimps worked really well and I now have an extra tool to add to my collection so...
Hi Guys,
Quick sanity check if I may.
I want to extend a ring main (add 3 extra double sockets) by extending off a single socket. For a variety of reasons it is not easy to access the wiring to rerun the cable to the original socket etc.
Is it OK to extend the original 2.5mm T&E using...
Thanks Guys for such fast replies!
I'll go with carefully running the cables behind the back box then.
I also appreciate the comment of horizontal chases & 1/6 of the wall. The plaster is fairly thick so really I am only chasing into the brick enough for the T&E to be flush with the...
Hi Guys,
A plea for some advice please.
I am extending a ring main along a wall to have 3 horizontal double sockets in total all at the same height and with the ring main running horizontally chased into the wall.
I would like to put a coax aerial socket next to the middle double socket...