Someone told me that the citroen zx diesel engine is virtually the same as the diesels used in Ford mondeo's and escorts, pre common rail engines. As I have a good zx engine and would like to put it somewhere other than another zx could any one say if this true or not?.
If so would it be...
In answer to David-IkonIT there is a program called Neotrace, this does various IP tracking fascilities. I m not sure if this could do what you need it to but thought I would put in my penneth worth, there is both free versions and trail versions of the pro I think maybe worth a go.
I had the thermostat set on max but I now think the thermostat needs to be moved as It is next the door leading into my kitchen (been there since I moved in) I left my other half running it this morning when it was quite cold and it stayed on. last night it was going off after 2 to 6 mins I...
Hi Chris, it was off I realised that I turned it off when I took the internal timeswitch. So now the ch is coming on (big thanks for your help and others help) I tried to put the timeswitch back in and this stops the thermostat calling for heat but Im not to fussed about that at the moment...
Chris, my appologies for being such a plum my boiler is infact as you state the turbomax plus (not pro as I previously stated). reading to many posts for answers I think going slightly mad.
The boiler in diagnostic mode d.08 (External controls heat demand) changes from 0 (0=open no...
I have also gone through the manual and as well as not finding anything on the sfh, I can't find any info on firing up the boiler this way either. If I work through the troubleshooting it leaves me at check / replace fan or replace electronic board. As it seems to work fine manually this has...
Not sure really!! saw it on another post regarding same boiler different problem but basically involves holding the bottom two buttons of the four on panel.
This turns heating on and displays sfh in the display panel. Heating stays on until same buttons pressed.
Hi All,
I have recently had a Vaillant 828e installed, hot water working fine.
honeywell 6360 mech stat will not turn on heating if I check the the status codes it states the external controls are calling for heating when I turn 6360 on.
I can turn on heating in sfh mode and its...