Recent content by FatPunk

Thanks for your help and your time, genuinely appreciated :D

Thanks - any idea where I could lay my hqands on some?

Replaced the valve and cleared the crap out, refilled and all ok. Now running some cleaner through before redraining for the inhibitor - wish me luck!!

Ayup. I have a leaking mixer tap in the kitchen. Expecting it to be washers I bought some, turned the water off, and dismantled the tap. The screw cap came off the handle and underneath were 2 thick rubber washers. removed this and found the screw to remove the handle. Underneath was the...

Aha - no zone valves, no vents (no heating)!

Could do but it looks like a bugger of a job! Are they valves on the great big brass bits that connect it to the pipe? They have screws on em! turned the one on the opposite side to the boiler a quarter turn and a load of black water came out...

Bled the pump already. Gave it a quarter turn and you could here the air escaping and the header tank filling the system up. Unfortunately this did not fix it. Can you explain a little more on the vents near the coil - I'm not with you on that (sorry, new to this!)

Ayup We recently had a leak from one of the rad valves so I had to drain the system to replace this. Because of the location of the H+E tank it's nigh on impossible to prop the arm of the ballcock so I turned off the hot water valve and main water stop cock to bled the system. I fitted the...