Recent content by filly

Thats typical! oh well cheers guys

My best description...... 1 solid back plate 3 holes at top, 3 holes at bottom top 3 labelled COM A, 1 way B and 2 way B botton 3 labelled COM B, 2 way A and 1 way A I can also tell which ones were used as The screws are still out, On the top COM B and 1 way A were in use On the...

I have 3 60w bulbs off each switch! It says 60 - 250w and 200 - 250v-

Beats me! I reckon I will just make do with lights that work on a fancy new switch. Thanks for your help on getting them to work as it will be dark soon! Cheers guys

They are candle bulbs! 60w

It was just an ordinary switch before and I did not make a note! I thought the instructions with the switch would be good enough! How wrong was I?? The lights turn on and off just fine but the dimmer does nothing at all!

Thanks a lot for that! My lights now work, but the dimmer does nothing at all?

I am trying to wire up a new two way dimmer switch. I have 2 cables coming in, each with a bare earth cable, a black and a red. My switch also has a covered earth (green/yellow) coming out of it. Each side of my switch has an L1 L2 and a third hole with ~ and an arrow going diagonally through...