Hi all
Hope you can help me, I've taken the old tiles off in the bathroom and bought some new ones which are 300x500. The walls have some adhesive where the old tiles come from but I've sanded this down and also filled some patches where plaster came of with the tiles, the question is do I pva...
Fingers cross everything seems OK, I didn't replace the gate valves as the lever ball was heavy and weighing down on the pipes, loctite 55 seems to work really well on the elbow compression , I wrapped the same amount as the ptfe before and feels really solid when tightening, and the gate valve...
so my plan now is remove both gate valves and replace with pegler lever arm, hopefully tighten more on the olive and remove shower valve elbow and wrap a bit more thread on the male thread.... let you know my progress :) thanks all for your advice
mmmmm the old ones i replaced failed to close hence why i replace them like for like but now i think i might change them to lever ones then... but i dont know which ones to get.... its only to isolate the bathroom