Recent content by fordyboy

yes, this looks good, thank you for your help

if I understand you correctly the issue is with your timer that you select the time to energise the off peak tariff that always has a override/boost option should you need extra hot water outwith off peak times that will be charged at day rate. If the suspected fault is with the supply...

the boost is the override so select boost and see if the circuit draws current

thank you for your e-mail. The one I am looking for is not included in any of the layouts you sent, I need a drawing with a vented hot water cilinder and unvented C/H loop, this type of loop would use an expansion vessel as I do not have the head hight in the loft to put a feed/ex tank. Thanks...

address is [email protected] Thank you!!

if its the round type its the red button on the side of the unit, if its the oblong type it should be on the front of the unit. Could very well be timeclock only letting circuit on for a short time, that is how i suggested the override, this will fully test the operation of the circuit without...

there should be an override switch on the controller, press that and have someone check the electric meter, if that starts to turn faster circuit is ok and trouble with the timer. See how you go from here.

Hi, I am almost ready to put in the pipework for a system condensing boiler with hot water storage. Boiler will be sited in the loft so no space for a feed and expansion tank. Has anyone got a pipework schematic for this system so I can double check before I start. Many Thanks, Marty.