Recent content by Foundation

Thanks for you help Tony, so I just reduce the main stop cock until the water temp rises? As for the gas, is this something for a corgi plumber or British Gas to look at? Cheers, Alan.

Hi, ok water flow rate is 1 litres in 6.2 seconds and gas rate is 0.072 = 23.11kw?

Hi, OK I ran the following tests; D36 - (All I got was a "-") D40 - (I got 58 ) D41 - (All I got was a "-") I think I have read the gas flow as per instructions and it takes 12 seconds when DHW is running for the fastest moving dial to do one rev. I will have to go out and try and get...

Hi Agile, I decided not to wait, I turned off the heating and left it for an hour, I checked all of the rads and they were cold, tunred on the hot water and let it run for 10 minutes, temp went up slightly to 60 degrees but all of the rads are still cold also checked the pipes going in and out...

Thanks for the quick reply, I will do the test first thing in the morning before the heating comes on and let you know. Will I need to check all of the rads or just the ones nearest to the bolier? Thanks.

Hi, I need some advice; I have been looking though the posts over the past few days and can’t seem to find the answer to my problem; I have the above boiler which is around 7 years old, was serviced about 18 - 24 months ago and had lots of parts changed due to hot water problems, only had hot...