Recent content by frailpigeon1

The plumber who fitted the system is coming back next week. I was just curious to know if this is a common problem with megaflow systems and if it can be rectified. We were very satisfied with the new system until the noise started.

Could you explain what are TRVs and an auto bypass? Where is the bypass fitted and what does it do? I have no plumbing knowledge whatsoever! Thanks.

Probably the heating system and pipe work. The noise stops when I turn up the thermostat on a radiator.

We had a megaflow system installed about a month ago. It has been working very well until yesterday when the vibrating noise started which we used to get on the old system whcih lasts for about 5-10 minutes. Is this an air lock and is this common with megaflow? Can it be rectified?

Thanks everyone for your help. We discovered the fault - it was the pressure bottle which was blocked and the machine is now working again.

There is definitely no water left in the machine.

Thanks for your reply but it is not possible to use the string as the door is recessed, cant get string behind it. Could it be a blocked pressure bottle causing this to happen? If so, do I access it by removing the front of the machine?

The door won't open on my Hoover Soft Wave 1100. Firstly the machine stopped part of the way through the fast coloureds programme just before the rinse. So I set it again to rinse and spin. Now the door won't open. I have tried a spin again, also unplugged machine for a while and switched...