Recent content by Frantch

yes, that worked. the pressure went back to 1 when cold and 1.5 -1.8 when hot thank you again

Yes just noticed that too thanks.

Oh yes ok, so I think this is what he was talking about (the manual says) "CH Circuit Drain" (i have circle in red), it is indeed in plastic and seems to be something I can turn with the correct tool. I'll try it tonight I'll let you know Thanks again.

Thank you for the answers, this is something i had read on other post online and was about to do it but prefer to be sure before. The thing is I can't locate that relief valve (I need to open the front panel etc etc yes?) and also I don't ee that drain point ? here are some picture of...

Hello, Usually the water pressure is around 1.5 bar. But this weekend I was away and my flatmate told me that the boiler stopped working and that the boiler showed "error F" that means water pressure below 1. So I told her how to put it back at 1.5 by opening the 2 valve blue and black...

Ok After some reading, it says that I had to connect the filling loop (it was already connected ?? is this normal ??) and then open the blue and black valve. I did it and the pressure is now 1.3. And then I closed again the valves. And the filling loop is still connected It seems to...

Hello, Ok, so my logic combo was working fine since today where it displays alternatively F and 1. I have looked the manual and it says that the water pressure is too low and that it should be between 1 and 1.5 bar and that I have to fill and vent the system. I have no idea what fill...