Recent content by frazza26

This topic is closed. I sent the panel back. Bought a new very similar one from elsewhere and the system works fine. Thanks for all replies.

Cpralarms - I think the PIRs are Ok. If I connect any of them to input 1 on the panel they trigger the alarm correctly. And I can set them all to 'chime' , to make sounds as I wander round the house activating them. I've come to the conclusion that the key pad or main panel has defective...

Hi tonyw2. Thanks for your response. I have done both (set the unused inputs to 'Used=No' ) but hasn't helped.

Hi 1974stephen & cpralarms, thanks for your replies. I'm beginning to think that the software in either the keypad or the control panel is defective. cpralarms - No, there's no delay. Only input 1 on the main panel will work, whichever sensor I wire to it will trigger the alarm, but none...

I have just fitted a new Accenta G4 Alarm panel and remote LCD keypad. The problem is that, though I can set the system into alarm mode, only one of the five sensors will trigger an actual alarm. The other 4 sensors don't, even though the system recognises that there has been activity in...