Recent content by FredD123

You have no idea how nice that would be and how impossible that is where I live...

Hi there, I'm trying to tee 16mm multilayer to 14mm copper pipe in France. As you can see from the pic the copper is below. I was going to use push-fit tees on the copper but I've realised it doesn't move at all - so I'm worried once its cut it'll be really tricky to tee! I am trying to not...

There is so much info on Google - really looking for someone to be kind enough to sense-check it!

None at all sadly. Is 15 fairly common in France also?

Hi guys, I wondered if you could help me. I'm attempting to connect a couple of 16mm multilayer pipes (hot and cold) to existing copper pipework. I'm in France, so unfortunately the 16mm multilayer has to attach to what I think is 14mm copper (difficult to measure diameter when it isn't cut...

Thanks everyone - I'll get an SDS then! F

Hey guys, I am trying to drill in some small 5mm holes to this old masonry wall in France - trying to fit supports for a bit of pex piping. I'm really struggling as the mortar just crumbles and the stones seem insanely resistant. Do you have any recommendations for what drill bits or pex...

:LOL:

Sorry Fred don't know why I called you Stevie!

Hi Stevie, Thanks for this. I don't actually know how the panels are retained - it is a long story but I won't be back there until next week to check that out. Going through your options (and I'm still learning - had to look up 'raised and fielded' etc) the first option seems easier. Is there a...

Thank you - so in the drawing above is the middle section of wood kinda like the door?

Hi guys, We've had a recent disaster whereby a storm has recently flung a heavy door (waiting to go to dump) into our new exterior doors. There is now a fissure / crack which essentially goes all the way through to the other side and we've only just managed to keep the door shut without it all...

Hi guys - we got a local plumber finally and the problem was not there but a faulty pressure monitor thing further up the line into the house. Thanks very much for your help on this!

Thanks Harry - so I've tried that and my thumb struggles to stay down, so we have good pressure but little flow when turned fully on. The trouble is we can't turn it fully on without somehow closing that outlet (because of the high pressure water spurting out of it) - but can't seem to find...

Hi guys thanks again for your help. I've realised perhaps my photo wasn't helpful without the rest of the meter. I've attached two photos now - one where I show the whole meter with markings for where this strange tap is, just after the meter itself and stop tap ... and the other a side view of...