Recent content by fullyabsorbent

Has anyone got any ideas how I can fix gravel boards to a fence when using fence post spikes. The gravel boards are 15 cm but so are the metal sleeves of the spikes into which the fence posts slot, leaving no bare wood to attach brackets or to drill in to. (n)

HI. I have a vinyl covered Kitchen cabinet door where the vinyl has lifted from the board and the pieces have snapped off. I intend to stick the Vinyl back using contact adhesive. Then I'd like to fill the chips and respray but does anyone have any idea what sort of filler I should use for this...

My Main Medway Super Multipoint has finally bitten the dust :(. Its Hobson's choice for a (NG) replacement either a Ariston Next Evo X 16l or the Vokera AquaNova LE. Does anyone have any experience of these water heaters and which one is the better choice?

I'm looking for a 100w victorian style outside wall lantern (without PIR) similar to the one attached that has a side entry so i dont have to drill through the wall. Has anyone come accross one?

I have some old incandescent R80 downlights in my kitchen. I'd like to replace them with LEDs. Are there LEDs that work off 240 volts without a transformer/driver so that I can simply disconnect the old fitting and replace it with the new one? This is the easiest option for me because I believe...

The heat pump is £130+and as I can get a BG engineer to do a one off repair Inc parts for £145 I'm going to go for that option. Thanks for all your help.

Yes. Thanks. What setting should I use on the multimeter? Ohms?

I've just run it at 70 Deg and realise it's not hearing. Suggesting heat pump or thermostat? Interesting/strange that this problem started with an apparent from drainage problem

Thanks. But I have obviously run all the basic checks. It is clearly something more serious. I have already replaced the reed switch so I suspect it is a different part which need replacing.

the tablets issue is a red herring i think. It is illuminated water tap light that is the issue.

although the disolving part may just be because i have been running it on a quick cool cycle?

No the operating instruction booklet is as good as useless. But on reflection the 5 beeps is simply an idicator that the cycle has finished. I have now checked the float and the bottom of the machine there is no water in the base and the float is moving freely. When i run the machine with a...

The brush symbol light on my fully integrated Bosch SMV50C00GB/07 dishwasher was flashing after the wash and the items were still dirty. I inspected the inlet & outlet pipes for blockages, cleaned filters, examined waste water pump – no obstructions, impeller rotating OK. I ran the machine again...

I have a cracked 600mm 2 tap hole pedestal basin made by shires - no longer available) which needs replacing. Can I put a new basin on top of the existing pedestal?

Can anyone recommend a really straight-forward simple programmer for my elderly parents who need a replacement. It's probably going to need to be analogue unless there is something special designed for old folks. Many thanks