Recent content by furtive

I'm having some work done on the front of my house that requires the bell box to be removed and replaced. Is there a way to disable it temporarily? Currently it's triggering the tamper every so often when the builders are banging away next to it, and they need to remove it completely...

Ok so my builder has fitted the valve but has given up on the wiring so I've sent him packing (I won't be using him again...and I am looking for a central heating electrician!) Looking at the wiring on the valve and the s-plan-plus diagram is the following correct: Grey - connect to Live...

Yes, it's a separate times for heating and hot water. It's one of these:

I forgot to look last night, but assuming I only have one valve in the airing cupboard, what does that mean?

Hmm, good point. Will have to have a look. There might only be one valve in the airing cupboard.

Excellent, many thanks for your help.

Sorry, the existing valve is a 2 port one like that. I need to add another 2 port one to the flow going to the UFH, but it's the wiring I'm not sure about. I assume the existing valve will have a wire going to the boiler/timer. Can I have another wire from the 2nd UFH valve going to the same...

Yes

Currently one motorised valve for the main heating circuit. And the timer is not built into the boiler, it's a separate Danfoss unit

That was sarcasm, by the way

Thanks for the helpful informative post

Anyone?

Hi, this is my first post and I'm fairly clueless when it comes to plumbing. My builder has installed Polypipe Overlay underfloor heating in my kitchen and has connected the ZRU to a separate flow and return from my boiler (so it is not part of the existing heating circuit. As he didn't put a...