Recent content by G60

Is the lockshield open?

If you need a loan of a fga let me know. ...off on hols on Wednesday so wont need it for a week...I'm in Bishopton....Its a Regin one click...not fancy but does the job

Its not overheating...the overheat stat needs manually reset (well it does on the vokera) get a decent engineer to look at it

It will come out..you may have to use needle nose pliers to pull the pin out then use the removal tool (if you have the grey one with the reverse thread) and get the remains out...Its a pain in the backside but do-able

If the expansion vessel hose has blocked twice in a year you really need to get the system clean. If you are still getting heat to the ch flow with the the rod pressed fully in then the shuttle could be warped or lost its o-ring. If your system is a dirty as it sounds the dhw plate hex could...

If you have some manual skills it is not difficult to fit a stove, it is best to drop a suitable liner.....and the twinwall type is harder to get down tight bends...ended knocking out part of the chimney to get mine down. After having my aarrow ecoburn for about 5 years now i would say it is...