Recent content by gazzaputt

Reading back what I have written here I think I answered my own question. I connect the live from the boiler to the live on the thermostat. Connect the neutral on the boiler to the neutral on the thermostat. Connect switched live from the boiler to A2 on the thermostat. Connect a...

Can anyone help? I have a Worcester 24i boiler that had no thermostat. I bought a Heatmiser http://www.heatmisershop.co.uk/Manual-Dial-Type-Room-Thermostat-Heatmiser-DS1-L-p-16225.html. Now the connections from the boiler are Live, Neutral and switched live. Connection on the thermostat...

New PCB cured the problem. Was the switch on the board as suspected.

As i say the only thing we could identify was the switch on the board for ignition. The switch has two connections on the circuitry one from the hot water and one straight from the CH dial switch. As the hot water is fine there must either be a fault at the dial switch for the CH or some kind of...

Anti cycle delay is a new one to me with this boiler can you elaborate more?

:lol: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=190178260608&ssPageName=STRK:MEWN:IT&ih=009

anyone any ideas? I have a replacement PCB on the way so hopefully the PCB was faulty

No I sourced from an reputable Ebay seller. No I cannot see a spark or flame.

I have checked all connections and these are. It is strange that the hot water is fine and CH doesn't work at all. I thought that the spark came from the same lead for the hot water and the CH?

I have a strange problem with my Worcester 24i boiler. The PCB became faulty and ceased to work. I have fitted a recon unit and where as before I had hot water and heating I only now have hot water. When turning on a hot tap the boiler ignites with no issues and continues until the tap is...