Recent content by geopap

Thanks, you are right!!! I thought it was on the other page and tried to understand it without searching more ... how fool :shock: I'll try it tomorrow. Thanks again

I found it here: http://www.spyalarms.co.uk/wp-content/uploads/2010/10/Veritas_R8_manuals-1-.pdf It's on page 22. You could read all the page to figure out.

It's not in the misc options, I found it in the Programming Zone Types section. Though, I cannot understand what to do :( From there, one can program a zone to act as entry/exit, etc. Which zone should I program to act as Personal Attack? Please help.

Well, I am an engineer (telecommunications engineer, of course not specialized to alarms), so, if you could guide me ...

The activation of the Personal Attack mode is performed pressing 3 & 9 together, as mentioned in the manual. Though, in my system this is not working. Can I activate it somehow? I am not sure if it ever worked. Thanks

Thanks once again SandyLyon.

Today I tried it. Thank you all for your help!!! Everything works fine now. The fuses were all ok. The system just needed to be unplugged for a couple of seconds (both from ac and from battery) and then reconnected to battery and ac. The configuration was done automatically, as mentioned...

Thanks SandyLyon, One last (silly) question before I try it: How will I remove the mains and battery, removing the fuses F5 and F1, respectively, or disconnecting the AC and battery cables. First I disconnect the mains and then the battery, right? I suppose that the mains stands for the...

No, the LEDs are off. Only the keypad backlight is on (I mean the green backlight for the numerics). 1) So how am I going to silent the alarm when I unscrew the main unit? Will I be able to give my passcode when the cap is away? Or will it sound until I screw it again and then give my...

Thanks for your quick response mdf290 and joe-90! I am a new DIY in alarm systems, and I don't know were these fuses are located ... I think you mean in the main unit, so I unscrew the unit, and I find the small fuses there? WILL THE ALARM GOING TO SOUND WHEN I UNSCREW THE MAIN UNIT???

Happy new year to everyone, I have recently moved to a house with a Veritas 8 alarm, with one remote keypad (RKP) installed and properly working. For some reason (I do not mention for security issues) the cables of the RKP were cut and reconnected, while the alarm was unset but with the power...