Recent content by ghjkl1234

Cheers Terry I'll have a try at that , otherwise I'll get a plumber in best leave to the experts than people like me . When I get it sorted I will post the remedy so at least it mite help somebody else in the future. Thanks again

How do I chek the oil pressure?

Although it went for an hour or so last night it I repeated what I did last nite no go. What's interesting ther is a bolt on the underside of the boiler not far from the bleeding bolt. The oil gushes through this but not the bleeding bolt. The oil is not forcing itself through even though...

Hi Bunnerma Although it's working how do I check it's running at the rite speed. Where is the oil filter on the pump?

I took off the flexi pipe & took out the bleeding bolt & blew thru again just to ensure there were no blockages. I started it up & away it went, although I did this before. Thanks everyone for your help , I'm completely useless with anything DIY. Cheers

The flow thru the flexi pipe is good but it's not coming thru to the bleeding bolt. I took off the flexi & blew thru it wen the bolt was out to clear it. For some reason the oil is not flowing as strong from where the flexi fits in & the bolt for bleeding.

I've got oil and the frustrating thing is I have checked the flexi pipe and the oil is flowing through this into the boiler it's just not coming in a very slight dribble when I unscrew the bolt usually do when I'm bleeding. Should the oil flow be stronger than that?

Its probably been 12 months. I have loosed the nut to bleed it but the oil is not floowing freely through it just in drops.

The oil is getting to he bolier ,when this has happened previously I have been able to loosed a nut the the front next to the red button, the oils usually fires out through this and I can quickly tighten it up and boiler goes, but not today. There are no air locks I have blew through all the...