Recent content by gje123

Hi, I fitted an existing digital pumped shower on our gravity fed system 2 years ago. For the hot feed To the controller/pump I replumbed the output at the top of the h/w cylinder to 45 degrees and teed off that with a loop. The cold feed is direct off a tank connector from a new 50 gallon tank...

Forgot to mention. The cold water tank is 50 Gallons and the HW Clylinder is 1050mm x 450mm.

Thanks for your quick reply. I've now split the post into paragraphs (new to the forum...apologies for that). The CW tank is directly above the cylinder with a distance of around 2.5M between the bottom of the CW tank and the top of the HW cylinder. The cylinder if fed by a 28MM pipe with a...

Hello. I installed a shower pump sometime ago into a shower room, which had previously been fitted with a non-pumped gravity shower, in which the hot water was supplied via an Essex flange. The Essex flange had been installed by the housebuilder 13 years ago. Before I fitted the pump, I would...