Recent content by Gnans

  1. G

    Valliant ecotech not re pressurising

    Thanks Picasso. That is exactly it turned out to be.
  2. G

    Valliant ecotech not re pressurising

    Okay my fault to start with as I started to bleed one radiator yesterday. It's a Valliant ecotech 838 boiler. I think as a consequence it had dropped the pressure in boiler. This morning boiler was auto shut. Investigation shows code F22. I tried the usual top up method but it failed. I...
  3. G

    Growing Vegetables

    Until now I have only grown tomatoes and herbs in pots. So this will be a gradual growth. I'm planning to start with Potatoes, tomatoes, beans, chillies etc. I want to take it slow and not get bogged down with so many to manage. Especially the pest problems which is listed here. I hear similar...
  4. G

    Growing Vegetables

    Thanks Pidgeon1 and Mottie for the inputs.
  5. G

    Growing Vegetables

    All, I have a fairly rectangular garden lawn with three side beds filled with some hedge and trees. I'm thinking of planting vegetables in between the hedge plants/trees. I have access to some wood to make box scructure. What is the recommended approach? Grow directly on soil or create a...
  6. G

    Re-painting shed - Suggestions / Recommendations

    Shed will be used to store tools. For now cleaned outside and applied fence stain. Thanks all for the inputs.
  7. G

    Crack in Garden Wall

    It's a shared wall with neighbour who has sent this picutre. Is this still good to be fixed with steel rods?
  8. G

    Crack in Garden Wall

    It's one brick length thick. Sorry didn't measure with the tape. If you see the picture some of the bricks are laid pointing it sides to each side of the property.
  9. G

    Crack in Garden Wall

    Hello All, This may not be a DIY solution but wondering what are the possible fixes that I should ask tradesman for. The wall (as in pictures) which seperates mine and neightbour patio had developed a crack. The management has asked to remove and rebuild the wall. I'm thinking of other cost...
  10. G

    Accenta Gen4 - How to set Program2 & 3

    Hello people, I have inherited Accenta Gen4 as part of new house I have moved in. I received the user code from previous owner and have changed the code. I have been able to only set the alarm on and goes striaght to Program 1. After trialing a few options from the User guide (avaialble hard...
  11. G

    Re-painting shed - Suggestions / Recommendations

    Thank you Blup and JohnD. JohnD - Yes the shed is under the shade of a tree and as you spotted no gutters. I will look into first wash and do the fence stain.
  12. G

    Re-painting shed - Suggestions / Recommendations

    Hello members, I have moved house and can see there is going to be some good amount of DIY required. I did a quick search on the forum below and see number of options for the shed repainting. I would be interested to hear guidance on simple option to start with the below. I inherited this Shed...
  13. G

    TP-Link HELP required setting up.

    So everything is connected via LAN? Or one part of this is wireless?
  14. G

    TP-Link HELP required setting up.

    OP, I see this as two steps #1 Connecting your TP link device to talk talk WiFi #2 Connecting TPlink device to Freeview box thorough LAN which should be straight forward. For the first one, when you setup keep the device closer to router. These devices work only with 2G and hate 5G signal. On...
  15. G

    Spam

    Just knowing email address is not going to haunt you any further. Just ignore any emails and DO NOT click any link sent by them. You should be fine.
Back
Top