Recent content by goody2b

What did you end up having done and how much was it?

Does anyone know where to get one of these cartridges from , as I have a customer whose shower valve cartridge needs replacing? Thanks

Hi I have just fitted a Glow worm Ultracom2 with a mechanical timer and a Climstat for the first time The Climastat is set to modulating. I have set the DHW via the Climastat When I go to set the radiator water temperature on the boiler I get a 'no'. Is this correct and is it...

Blimmin Ink! That means bin 5 ufh stats and a rad stat....hmmm Well, I have nearly finished putting the boiler in and at the moment it is working via the present prog stats on the rads and ufh, I may end up sending the climapro back as it seems way too expensive just for the sake of...

Ha ! Never noticed that forum before! I will! Cheers

When I was installing my underfloor heating , as I was totally sealing in the heat, I was advised to ensure that there was adequate ventilation to avoid the possibility of condensation forming underneath the insulation and maybe transferring across to the timbers and then causing them to rot...

About 15 years ago I fitted loft insulation underneath our ground floor using the plastic netting used in gardening..I noticed a small difference When I retro fitted underfloor heating to the whole of my ground floor using the harder insulation boards and noticed quite a big difference. If...

Sorry about the delay...Yes I am Gas Safe qualified and getting ready to cough up again for that ' privilege ' I have had a conversation with the electrician who originally wired in the ufh and his main concern is that the 24v Climapro2 may interfere with the other 230v programmers or vice...

Hello there I need assistance in trying to get me to understand how to get the full benefit out of fitting a Glow worm Ultracom combi with a wireless Climapro2 programmable roomstat and a weather sensor. The Climapro is a 2 channel roomstat which is my case will control the heating system...

hi Mhairig Did you sort out your polished floor as we are looking for a similar finsh on our screed Thanks Ian

Yes you re right...sorry about that! And thanks for the info. I had already seen all the details on the Polyroof websites and nothing really helped us on our problem, but thanks anyway.

Well after being advised by the roofing company to have coping stones on top of the parapet wall and fix the balustrading through the coping into the solid wall underneath, instead of the Polyroof going over the whole parapet wall, the Polyroof Protech Polyfinish was applied What a joke ...

Hi Has anyone any experience of having a balcony covered in Polyroof Proec Polyfinish along with stainless steel balustrading? We are having a problem with finding a suitable method of sealing around the protruding steel posts. Polyroof ae advising that we use a wood stanchion method, but I...

The overhang is about 1.4metres. The roof it is going to be Polyroofed with an antislip finish. The overhang screeding part is actually ok as it falls back to a drain point , it is just the rest of it! The builders came today to have a go at trying to lay about 25mm tapering down to 1mm...

Hi It is about 3.1metres by 5.6 metres. We wanted at least 40mm fall from the house across the 3.1 metres. The builder has just told me that the screeding company said they would send the screeder back to get it all up and do it again. Which I think would not do the block and beam any...