Recent content by greg rickford

Thanks everyone for your help. Turns out the keypad was defective. Possibly dropped heavily in transit, the coil that senses the fobs had broken away. Resoldering it to the circuit board was too tricky for me! Got another keypad and it all works a treat. Thanks again

Thanks for taking the time to help. The panel and prox are both new though the prox came from ebay (all boxed, honeywell labelled and with instructions) The reader does not beep at all when tags are presented. I've now acquired some grey YXO-0020 tags and they dont beep either. Under...

Thanks for taking the time to respond. It's beginning to look like maybe the keyprox is faulty despite being new. Galaxy Guy tells me it should beep when a tag is put to it even if the tag is unregistered. I get no beep at all.

Hi - and thanks in advance for your help! Despite having what I think is a reasonable understanding of electronics and computers, I'm stuck with getting a newly installed Galaxy Flex 20 with a Mk 7 keyprox keypad (CP038) to register any tags. I have set up a users with a PIN number and the...