Recent content by Gridcap

  1. Gridcap

    Solar battery

    stender, a couple of things that might save you replacing kit that's still working. Your FIT inverter probably can't take a battery, but it doesn't need to. An AC-coupled battery comes with its own inverter and sits alongside the solar, so the panels, the existing inverter and the generation...
  2. Gridcap

    EV Charging.

    pete01, a few things on the supply side. The cut-out fuse is the DNO's, so you can't change it or pull it yourself. Book the DNO or your supplier's meter operator for that, including when you fit the isolator. Every charger has to be reported to the DNO. If it's the only new device, the supply...
  3. Gridcap

    Could someone help me calculate maximum demand for my house?

    Chris, I'd go back to National Grid with a more realistic figure before they assess it. The 139 A is mostly breaker ratings added together: the 40 A charger circuit and the 32 A solar circuit at full value, with diversified house load on top. Two things bring it down. The solar shouldn't be in...
  4. Gridcap

    EV charge point 60A-100A or not?

    Your gut feel sounds right. With gas heating and no electric shower, a 7 kW charger (about 32 A) on a 60 A fuse is often workable if the charger has a CT clamp on the meter tails, so it backs off when the house gets busy. The installer will do a maximum demand assessment. If the new maximum...
  5. Gridcap

    CT Clamp Location For EV Charger

    You're right that the EV CT needs to see whole-house import on the meter tails so the charger can back off before the cut-out fuse is pushed. On a layout with Henleys feeding a house CU and a solar/battery CU, that usually means the EV clamp on the live meter tail before those splits. Before you...
  6. Gridcap

    CT Clamp Location For EV Charger

    You're right that the EV CT needs to see whole-house import on the meter tails so the charger can back off before the cut-out fuse is pushed. On a layout with Henleys feeding a house CU and a solar/battery CU, that usually means the EV clamp on the live meter tail before those splits. Before you...
Back
Top