Recent content by Gusgus

Hi the reason it is working is I attached the lamp light neutral to the earths and the lamp light positive to the hot switch , so I am getting a electrician on the free to check this out . For peace of mind detached lamp light .thanks for supporting me gus

hi, (1) voltage value at ring main socket live to earth 244. (2) voltage value at wall switch hot live to earth 244. sorry bingo = light working. gus

hi light is working . The RCD DID NOT TRIP , have disconnected lamp till next week waiting till the electrician checks . the ring main socket has been ok for over 6 yrs no problems and the RCd has not tripped with all my combinations should it have . thanks in advanced gus

hi thanks for all the input . sorry about the grammar. New info : live feed comes from ring main socket .(1)checked with a proper circuit tester ring main live to earth =live (2) switch live to earth =live (3) switch hot live to earth =live (4)outside terminal two reds to earth =live(5)switch...

thanks for the quick reply. checked the lamp with flex/plug all 3 bulbs worked did this 10 plus times so did my pal . checked both sides of the wiring all the way to the bulb holder 10 plus times all showing hot , even returned the light to WICKS returned with a new light zero we are both 70...

thanks for the quick reply. checked the lamp with flex/plug all 3 bulbs worked did this 10 plus times so did my pal . checked both sides of the wiring all the way to the bulb holder 10 plus times all showing hot , even returned the light to WICKS returned with a new light zero we are both 70...

hi guys, first post ,I have read 2 posts on outside lights, I replaced a pir outside light with a non pir light. The light worked for 3 days , checked 2 bulbs /exchanged the light fitting for another one just in case . zero . used a screwdriver with fuse light ,checked 2positive reds/ 1black...