Recent content by Gustave

Great, so if I consider my top floors eaters being around 15% of my entire heating system in terms of size/water need and they were the ones not heating properly (water not filling them or just the bottom of it, rest of the heaters in the house were working properly) after 1 year, I can think...

Thanks guys, looks like the leak from the boiler itself/flow connexion is no more after a day of testing so I will put this on a too full system due to me not seeing the real gauge/pressure level and adding a bit too much water. However, yeah the gauge needs repair and I will defo mention it to...

thx, will follow your advice with asking neighbours. Leak from the heating flow connexion has stopped after a moment with heating on so I guess there was maybe a bit too much water in the system that was being evacuated. I tapped the dial lightly , the black pointer is going up very quickly but...

Thank you very much Terry, these are very helpful tips for a newb like me. Since I posted with a bit more research online, I understood that my gauge is not working (not moving at all wahtever I do) which is certainly an issue (biut does not stop the system to work). I think the leak of my...

After stopping and restarting the heating, the heating flow connnexion of the boiler is still dripping a lot , defo linked to the start o the heating as as soon I put donw entirely the thermostat (stopping the house heating the dripping slows down and stops...Is it a normal process as maybe...

Hi all, Have some issues last winter in my loft with 2 my heaters there not heating entirely, I mean the bottom of the heater gets hot but not the top. I bled them but did not change the issue. did a bit of research and read that I needed to increase maybe the water pressure. I looked at my...