Sorry forgot to mention, I don't have any isolating valves on the mixer taps, but ran each one as instructed and couldn't feel the hot water pipe getting cold, so I tried looking at the shower cartridges.
Air gap has been replenished today.
I took the two shower cartridges out and cleaned each one before putting the back in, however this did not seem to work as the dripping continued after the water main was turned on.
However I did notice that when replacing the en suite shower cartridge...
Thanks for the tip
Do you recommend doing this on all the mixer taps in the house, or just those above the cylinder on the top floor? I thought the water was dripping into the hot water system via gravity, or could it be coming from those below or on the same floor as the cylinder.
I was...
Hi
I have a unvented system with a megaflo cylinder, over the last year I have noticed the outflow pipe dripping outside. British Gas have replace the cold water PRV and the temperature and pressure value. Each time this has solved the problem. However the water has recently started dripping...
Hi
I'm trying to replace 3 smoke alarms in a 3 storey building. The smoke alarm units each have a brown, white and blue set of wires.
On the top floor the existing alarm was connected to a red, yellow and blue wires in the ceiling.
On the second floor I have the red, yellow and blue...