Hi all ,
Have sourced a Sunvic TLX 7501 to replace my old Satchwell TLX 2251 , there are just two wires that come from the wall inside the Satchwell , shown in the picture below.
My question is , which pins do i connect to inside the Sunvic TLX 7501 ? , both the wires that come from the...
All just been serviced . Flue is good.
The thermostat is old and looks crap , the temperature dial on it doesn't correspond particularly accurately to the temp in the room , so thought it was time for a new one.
Thanks for all the words of advice on the asbestos sheet thread ...
I wonder if i could pick your brains on another matter ?
My warm air unit is a Johnson Starley JT 19-25 mkII , and my thermostat in the lounge is old and past it , i would like to fit another more modern one , and have...
Thanks all...
Had no idea I would be looking at so much. As far as i can see , it is just screwed on , but it could have some glue behind it i guess. Spending thousands to remove a 2 x 3 sheet of asbestos seems a bit silly. :oops:
I'll do the edges with PVA as advised , and leave it be...
No , not damaged at all , but the edges of it are exposed . It's basically a sheet of cut asbestos screwed onto the door.
I wasn't going to remove it myself , but would fit the new piece of fabled ' Eurostone ' myself . I wouldn't mess around with asbestos , don't worry. I appreciate that...
Hi all,
I have a warm air unit that lives in a cupboard in my hallway , when i was having it serviced , the engineer noted that i had an asbestos sheet screwed to the inside of the cupboard door ( presumably the inside of the door gets hot because of the hot warm air unit inside ) ...