Hi
I am having an extension built and the roof rafters have just gone up but I am a little unsure if it has been done correctly.
The roof is pitched at 14 degrees and is 7.5m wide by 4.3m.
The builder has used rawl bolts to fix a 200 x 38 to wall and then used joist hangers to connect the...
Jackrae
firstly thanks for your quick reply, I am just a little concerned that getting the right thickness slate will be impossible. The beam it tight up against the joists and trying to tightly fill the gap evenly with slate is going to be a challenge to ensure it is make full contact with...
Hi
We are removing a load bearing wall (supports first floor joists only) and have had a SE come in a do the calc. There is a door in the supporting wall and when we removed the load bearing wall we found a lintel across the door way exactly where the padstone would sit, thankfully it meets...
I have picked the lock with some lock picks bought online, bit shocked how easy it was.
Going to take the lock to a locksmiths on monday to get a key made.
Thanks for all your help
Sully
No markings on the lock or the patio door. It is a sliding wood patio door and the lock bit you see in the image is a pin lock and stops you swiveling the handle to undo the latches.
I will have to drill the lock out but need to know where to get a replacement. Hoping I can just replace just...
Used this site for ages but never needed to register as I always found an answer, now I need your help :) We have lost the key to the patio door and need to buy a new handle/lock please help me identify the lock as I can't find one online.
Picture of lock
Thanks
Sully