Recent content by ian1888ah

Got it sorted now, the heating side if the control had blown but the hot water side was still working. Just replaced it and all is fine. Thanks for everyones help. Ian

Ok i'l try that when i get home later. Do you not think it would be more to do with the pump or the wireing for it?

the send a return? is that on the boiler or stat?

Ok had a plumber around and he confirms everything is ok with the boiler and switch. he sais its an electric fault. As i understand the stat controls the water pump, is this the next place to check?

I have a baxi solo wm 30/4s and when replacing the room stat, wired it up wrongly. There was pop from near the boiler and the kitchen tripped out. Now the water still heats fine, but not the radiators and there is no power going to the room stat. Does anyone have any ideas??

the only fused spur is switched, and if you turn that off the power to the heating controler goes off

Right found my multimeter and none of the wires in the stat are live? Have i blown a fuse, were would it be?

its a landis rwb200, 3 sets of wires going in the back

yes there is a time clock, but i set it to boost so thats not an issue

Not really, will have to get one tomorrow then. What am i looking for then, live obvioulsy, but how do i check the others?

ok tried yellow and red 2gether but nothing.

Oh just to make it safe? I'l try that thanks.

connect the blue to were?

ELZ4742, The red in a chop block, and try the yellow with it to see if the boiler fires?

cant get hold of meter, all the shops are closed now. Well with the red to live the yellow to call for heat it should work but doesnt. The water still heats and the boiler fired when you ask for water, just not heat. Cant see the wires in the back of the boiler either.