Recent content by ifearnobeer

Irecently had to replaced a seized water pump on my flexicom cx.Rather than throw it away i decided to strip it down and try to repair it .I removed the 4 hex bolts and lifted away the plastic cover.then using 2 flathead screwdrivers i removed the top plate assy by gently prising it off.this was...

Thanks 45xxx how didn't i notice that.I'll strip down the old pump now and see if i can free it.I may need it again.Is a seized pump a common fault with boilers?

Hi,i have a glowworm flexicom 24cx.I have just replaced a faulty water pump(seized) and dec ided to test the system with the gas still turned off.I t went through its usual start up procedure and then F1 came up which was expected as there was no gas.The problem is i cant get rid of this fault...

Thanks i'll try that but i have to get into the service menu for a factory reset.Normally you can get into this menu by switching on while holding down a couple of buttons but i don't know which ones.

Would a factory reset be the answer.If it is still not working after a reset then there is likely to be fault with it rather than a switching problem,does that make sense.

I have tried all the settings in the user menus but no luck.Is there an engineering menu i can get into to have a look there.I'm sure you're right and . has somehow been disabled

I have an hitachi 42 pd9700u.I can recieve freeview through the "f" connector and hd through the hdmi but none of the scart sockets or phono inputs work,hence no dvd or s*y.Any help would be appreciated.Thanks,Brian.

Thanks for your advice and quick response,Brian.

Hi, i have just purchased a glowworm flexicom 24cx and i have noticed that the gas input pipe is only 15mm.I was led to believe that it should be 22mm.I am reluctant to have the boiler modified by the fitter as it's brand new.Have i been sold an old stock model?Should i send it back and get one...