Hi, I've had a search but haven't come up with much.
The shower end of my bath has an awkward angle in the wall, so to fit a shower screen I've had to make up a baton that fitted flat to the wall (much planing and getting the angle right, and realising how wonky the tiles were!) and gave a...
Brilliant, thanks ChrisR! Will check it out.
Is it the sort of repair I could attempt myself? I'm fairly mechanically adept (I run a bicycle workshop)
: P
Thanks for taking the time to reply, ban-all-sheds, and for the reading matter.
I probably should have made a couple of things clearer in my FP:
- Although the bathroom is on the other side of the wall and you can't see both sides of the wall at once, the bathroom door is only a couple of...
Thanks for taking the time to reply, Gasguru!
The pressure gauge reads about 1/2 (on the edge of or well into the red zone) when rads cold and about 2 1/2 when hot. The low pressure light hasn't come on when the pressure has dropped to zero, although I _have_ seen it come on once while...
Blimey, I've just had a bit of a read through several other forum threads that inevitably involved Potterton Pumas.
Is it basically a Rubbish Boiler? Am I better off getting it replaced before I get through more valves, boards and suchlike? I don't much fancy spending a couple of grand, but...
We've just moved into a new (to us) flat. It has a Potterton Puma 80 combi boiler that seems to have been installed in 1999.
Up until yesterday, heating and hot water worked more or less OK, but there were a couple of problems: if hot water was run continuously for more than about 2 minutes...
Hi,
I admit that this is my first post and it's a real newbie question, for which I'm sorry; if my question is easily answered by an FAQ or other post, please point me towards it. I've had a couple of quick searches and short of downloading Part P and digesting all of it I can't find a...