Recent content by jamesbates87

  1. J

    16 Amp for ring main (plugs)

    Hi, Thanks for that and the reply. This is brilliant, I will now crack on and get this plasterboard. Thanks for the help and advice. James
  2. J

    16 Amp for ring main (plugs)

    Hi, Sorry consumer unit. Ahhhh okay, so I can run 5 double sockets on a radial circuit then with no issues. This will be good off a 16 Amp fuse within the consumer unit? Thanks James
  3. J

    16 Amp for ring main (plugs)

    Hi, The cable that has been used is 2.5mm cable, the same as everything else in the house. The 5 double sockets are in a study, so run maybe a TV, PC and lighting that's about it. I always thought it was better to run it back to fuse board.
  4. J

    16 Amp for ring main (plugs)

    Hi, Just been fitting out our garage into a room and was fitting a few more plugs into the room. Had a look at what the electronic put in, and followed it back to the fuse board. When I followed it back, it went into a 16 Amp fuse. Further to this, the two plugs that the electronic put in...
  5. J

    Bricking a window up - Help if possible

    Thanks for the replies guys, that's brilliant!! James
  6. J

    Bricking a window up - Help if possible

    Hey guys and girls, I was hoping for a little bit of help in regards to a garage window that we are looking at bricking up and getting rid of. I am happy with the bricking and doing that, but I am a little lost with the bricks at the top which I guess is where the lintel is. Is it best to...
  7. J

    Help and advice in regards to small crack and expansion joint

    Good evening everyone, I was hoping for a bit of help and advice in regards to a couple of things that I have on my house. The house is 10 years old and has had no issues whilst we have been living in it for 6 years. 1. The first issue that was raised was that there was a slight crack...
  8. J

    15mm Isolation Valve to Cistern - What flex hose is needed

    So this one yeah? http://www.wickes.co.uk/Wickes-Flexible-Tap-Connector-15-x-12-x-1000mm/p/160139 Thank you James
  9. J

    15mm Isolation Valve to Cistern - What flex hose is needed

    Hi, Thanks for that buddy !! The Isolation valve is already fixed. Thank you james
  10. J

    15mm Isolation Valve to Cistern - What flex hose is needed

    Good morning all, I was hoping for a bit of advice in regards to Flexible Hose/Tap Connectors. I need one for a bathroom that I'm doing and I'm getting all confused with everything. I need a Flexible Hose/Tap Connector from a 15mm Isolation Valve to a Concerned Cistern. What one do I...
  11. J

    Bathroom Fan - Ducting

    Hi, I'm looking for some advice regarding ducting for a bathroom fan. I have been reading reviews and searching the internet high and low, but there are so many different things I thought I would ask the question. At present I have ducting that is running in the loft space to a...
  12. J

    Bathroom Fan - Ducting

    Hi, I'm looking for some advice regarding ducting for a bathroom fan. I have been reading reviews and searching the internet high and low, but there are so many different things I thought I would ask the question. At present I have ducting that is running in the loft space to a...
  13. J

    Bathroom Fans

    Hi, So I.E have two inlets within the bathroom running from one in line fan? Thanks Jimmy
  14. J

    Bathroom Fans

    Hi, Thanks for all the replies there really useful. The loft was done before I moved into the house, along with the fan and ducting. The ducting is the white tuber one and runs above it all. As the loft has been boarded out. So what do you think is best for me to do now? Buy...
  15. J

    Bathroom Fans

    Hi, 1. The bedrooms aren't really damp, just a slight build up of condensation on the windows. 2.. There is a slight gap between the door, I will be looking at that and creating a slight bigger gap. 3. The ducting is running above the insulation. The loft has been insulated I.E with...
Back
Top