Recent content by Jamie10

Thanks everyone. I done a couple of washes but the scratching noise was irritating me. The brushes are only a tenner on ebay (standard ce set) so I ordered another pair(correct long side). Will let you know how I get on. Cheers Jamie

Does it matter if the long side is left or right on the carbon brushes? I recently purchased some and couldn't remember the long side. I got told it doesn't matter anyway as they will wear in accordingly. typically I got sent the wrong long sided brushes, however I continued as advised to...

Struggling to source some brushes. Anyone got any ideas? Electrolux EW1000I Pro No 91488002600 ser no 136 0051

Any ideas on the above? :? I am thinking of replacing the valve and head. How hard is it to drain the system? I think its a Y plan set up. Boiler, Tank, Pump, mid position valve and programmer. Jamie.

Whoops sorry should mention that one of the plastic points on the bottom of the unit has snapped off and fell down its relevant hole. Not sure if I did this or if it was already like it?

Thanks for the replies. Right here goes. The spindle/indicator is in the middle position (M). When I test for movement i.e CH, CH&HW and HW there is no movement or noise from the unit/head. This obviously explains why the rads heat up coming on when the HW kicks. When I take the...

Hi, To start my washing machine(Electolux EW100I) I have to give the motor a tap with the thick end of my screw driver for it to kick in. Once going it works for the duration of the program. However, it does make sparking noise and there are sparks coming off the motor near what I think are...

Possibly faulty mid position valve? Hi everyone As the summer is here I decided to turn my central heating off but keep the programmer on for the hot water. However, even though the programmer shows the CH as off the radiators still get hot! in line with the Water program Could this...