Recent content by jasenjo

I have an engineer coming today thanks . but when u say drain the heating down is that from the large emersion tank that's next to the red vessel? if so wouldn't it just fill back up if I haven't turn main water supply off.

I mean how do I take vessel off without water going everywhere?

Maybe I don't but people are saying its easy just to swop vessel for new one. I am not a total idiot if given the right thing to do. U seam to know about this stuff, so how do I take vessel off? Do I turn stop cock off an drain the emerssion dry?

Hi it's a red zilnet 12 lt.

The boiler is a flex icon 15hx

Need help please

Need help please. There is no shut of valve to isolate the broken vessel. Do I turn water off at stop cock and drain emerssion tank.

Thanks for reply. The zilnet vessel is leaking water from the seam. The system is a santon unvented hot water system. I have a large grey tank and two small vessels one red one grey. From what I've read on Internet I need to isolate water to broken vessel but there is no shut of valve...

My expansion vessel has broke , can I do it myself or do I need an engineer to do it? If I can do it do i just drain whole system an swop it over?

so can I replace the broken red one then or does it have to be engineer? an if so,do I just drain all water out , swop over vessel, then turn water back on?

thanks for replying pete it says santon premium plus unvented hot water system. I have a large grey tank and two smaller ones one is grey the other is red. its the red one that is leaking. on the internet it says I can isolate the red tank from water supply but there is no way of doing...

hi yesterday my red zilnet expansion vessel starting leaking from the seam. I have bought a new one from screwfix but I am wondering is ok to replace myself or should I use a heating engineer? if it is ok to do myself do I just turn the water off at mains and electric off, then bleed the...