Recent content by Jay19922

Sorry only just caught on what you said about wrongly connected to earth il double check this tomorow Even so wouldn't it still trip ? It's only tripping when I add the red or blue on this certain cable to the circuit?

When I took the light down there was no white cable I've checked the cores and there's none there at all The light which works is on a dimmer switch in living room this one is then in a dinning room on its own switch

There's no other colour in the cable just a 3 core red Blue and earth Worked perfectly before taken apart I just don't understand what I'm doing wrong With the 2 cables connected together (supply from board and cable to the other light connected together) The red and blue on separate...

It is a very odd combination After this problem I changed the other light in the room and had no problems at all it worked I swapped cable for cable which I didn't do on the first one with the cables poping out The only thing is the switch is broke after it tripped would this affect...

Okay so the perm live and netural from the board are on connectors The other cable is also connected perm live and netural (this brings the other light one ) So these 2 cables are connected together on connectors 2 Perm live and 2 neutrals The last cable both red and blue are on their...

Okay so the perm live and netural from the board are on connectors The other cable is also connected perm live and netural (this brings the other light one ) So these 2 cables are connected together on connectors 2 Perm live and 2 neutrals The last cable both red and blue are on their...

Yes it is when connected to perm live (either red or blue) they both trip Wouldn't one be perm and one switch though ? Unless the other cable is connected wrong It doesn't trip if these two are connected separately with other 2 cables connected perm live and neutral

Yes it is blue and red I also found this strange one new and one old colour I have a continuity voltage tester What would the best approach be ?

Unfortunately not the plastic crumbled and 2 Cables popped out as they must of been loose I have switched the mains on and I've got the supply at the light which eliminates one cable as that's the supply But the other two I can't get to grips with I connect one and the other light comes...

Hey guys just wondering if anyone could help I took a light down in my house today and the ceiling Rose was crumbled and cables literally fell out as I touched it I had to put them on connector blocks I have 3 cables coming in to the ceiling rose I connect all cores on connectors...