It's about 2,200 sq ft, 4 bedrooms, 3 bathrooms, with about 20 rads... My plumber said that Part Load is related to the gas mix - the gas is analysed - he says 18KW is "more than enough"....so now I'm confused as to why I needed a 30KW boiler, if it just gets throttled to close to 50% of its...
Thanks
Some interesting developments to report.....
I set the DHW cylinder to 60C and the boiler to 60C Flow and hey presto this morning, I have toasty hot water and the boiler display says 60C! This is progress!
In the diags menu, D0 (Partial Load) was set to 18 (KW I assume?), so I have put...
Hi
Per some of my other threads, I have an issue with a BG 330+ Heat Only conventional boiler.
I've managed to get into the diagnostic menu and double checked Flow & Return Temps.
Despite the Flow Temp being set at 75C, it NEVER gets above c.53C even after 4 to 5 hours of the boiler firing...
Yes, thank you! I've managed to confirm that through the diagnostic menu. So, I have an issue then....despite setting the flow to 75C, the display never gets past 50C....
I have a British Gas 330+ Condensing Boiler.
Quick question on operating the above, if I may?
I've looked at the manual - it really doesn't answer my question....
There is an LCD display and an Up / Down toggle switch.
I can set the CH flow temp up and down using the toggle switch and having...
I have two problems that I cannot figure out how to solve....
1. Cold water pressure to the tank in the loft
The mains pressure at the cold tap in the kitchen (I believe this is where the rising main enters the house) is good. By the time it gets to the cold water tank, it's barely more...
Hi All
I was very kindly and quickly helped yesterday with an installation question for a programmable room thermostat - all now in and working!
It is one where you can program different temps for different times of the day. Prior to this, our boiler was programmed to go off at night for...