Ok I have been taking off the heating actuator (plastic box)from the brass valve and turning the spindle a quarter turn with the pliars. This seemed to turn my heating off as last week I had the opposite problem and my heating wouldnt turn off. Where as now I cant get my heating on.
I hope...
Yes its me again
It was sorted last week and I have been having to use the pliars on it sometimes to unstick in but today when I came home my heating wasnt on and I cant get it on now.
Can anyone help?
My heating wont work. It is a lifestyle lp241. My programmer box looks like it works but my heating wont come on. I have turned it off and on again and it wont relight.
Hello again,
My heating did the same thing again this morning so I took it off and used the pliars again. Do you know how I can stop this keep happening? Do I need to oil it to stop it sticking?
brilliant I've tried it a few times now and it is now switching off on its own. Thanks so much you have really helped me and saved me lots of money.
You have been very patient with me thank-you.
Ok I just did that and the whole thing came off I didnt realise that it had a screw in one side holding it down. It stopped. Anyway I put it back on and took the lid off. I cant get the lid fully off because there is a pipe above it. I can see some wires and a spindle I think you were...
Ok I turned it on at the programmer and nothing happened I thought this may have been because it was still hot and I had turned the thermostat down. So I turned the thermostat back up to 21 degrees which is what I normally have it on and I heard a click from the hot water tank cupboard. The...
I have pushed in the switch on the end and the boiler has stopped making the noise as though it is on. Nothing came off but I think that might have fixed it. I will wait a little while and see if my boiler starts up again or not.
ok I think the metal one is for the hot water because it looks like it is connected to the hot water tank. So I think the plastic one is for the radiators. There are a three black switches on it, do I need to press or move one of these?