Recent content by Jeremy2014

So we been notifed by the neighboors of the the below: "I hope you are all well. x and I live at number x and we have recently had a damp survey due to damp in our vestibule. I have attached an image of what they believe to be the cause, which is a pipe that needs a small repair on your...

oh gosh, I misread the instruction. thanks so much for your help and clarification! really appreciated.

Gosh, you need to be good in numbers. So hopefully I have read it right and have calculated 8286. Finger cross that is correct. :-)

HNY 2024 ! So we have this meter for our freehold that British Gaz have not checked for ages but sadly i am unsure how to interpret and do a proper readin. Any guidance by any chance please? Many thanks

Yes Yes - Saw it and that seem ideal to what we need :-)

oh my search was not as clever - will explore more and thanks for the feedback so to make sure that suitable for outdoor. Yes main power with a interrupters - thought bulb been off - so need to get a new bulb so to check that there is still juice going into the light fittings. I am on of the...

Oh I did not realised that this was possible. only looked at B&Q - let me try to find one with black edge rather than white one and job done! :-)

Hey Expert Electricians, So have that light fitting outside that we would like to replace with sensor light as the current one is kind of useless to have it off when it can be only switch on from inside - unless it is left on all the time. Have been looking at "sensor outside light" but they...

Cheers thanks good to know as often paste with link and pointless if you expert unable to get there.

Cheers thanks for the confirmation! Good to see I am more knowledgeable than their staff!!!:eek:

So I don't really trust Studs / Kids working at B&Q so we are going to replace the light fitting with these below https://www.diy.com/departments/goodhome-wutai-black-pendant-ceiling-light-dia-380mm/5036581096939_BQ.prd Maximum bulb wattage 42W and was going to use these bulb which are...

https://www.ebay.co.uk/itm/255638410075?epid=9016102542&hash=item3b853c935b:g:IMcAAOSwAcheLuCq&amdata=enc%3AAQAIAAAA4FJTZFxhEe3B8psybQDU9PhLIGy3ed4L3F3440Vojze5585uU%2BFygOHyWcifQeRIQN1suHd09xZjoi2rCXoKt5UNbAc2997yBk8r7dUMaeemYDulFc16OLORdKKVcxqxZGpQW%2F8k%2FcNHKQ9elvPgsA%2B6mz1gG3PJu%2FqzvFWrBi%...

So, managed to cut the water, and unscrew the little screw but then stuck. Unable to remove the handle completely. They Seems to be stuck. Is that then a plumber job? Don't want to break the full tap.

Hi Expert DIY people! :-) So I have a leaky tap and decided it was time to replace the cartridge which hopefully would solve the issue. So the tap that i have is very similar to this one...

have tried and it was too much faff to paint so off to screwfix tomorrow to buy a new one. However, one question, any alternative recommendation to Hammerite as metal paint? I have used it on rail for our properties, but after 2 years, it usually need to be done again, so open to better...