I have tried resetting it but it is not working and the thermostat for the central heating has been shut down by itself. I've also turned the valve clockwise again fully. Thanks for all the help, but I wonder if I should just call an engineer in haha
After doing everything and turning everything back on, on the ideal boiler I have the fault code with fd which means no water flow.
Any ideas on how to solve this ?
Thank you! Do I fully turn the valve clockwise till I cannot? Do you know how long I should roughly wait before checking for hot water and the heating?
I fully turned the valve anti-clockwise until I could no more, and then turned it to a 1/4 clockwise. However, I cannot really hear much as I am still hearing the same noises from the boiler from earlier on. I tried to upload a video of the noise but I am unable to
Thank you for the reply, sorry if this is a stupid question but do I need to turn off all the boilers before attempting this? Also, how long would I leave the valve open for after fully turning it clockwise? Apologies again as this area is not my expertise (as you can probably tell!) What do you...
Thank you for the marking in the picture. From the blue arrow, the second picture with the pipe with the green lid leads into the boiler and the second picture with that blue arrowed pipe leads into the floor. I am assuming I need to turn either left or right with the thing in the second picture...
Hi, firstly I would like to apologize in advance as I have limited knowledge in this area and so some things I may not know or understand.
I have a boilermate Gledhill upstairs and an logic ideal boiler downstairs. We bled all the radiators today and realised we did not have any hot water. In...