Recent content by jimboscooby

Thanks alot for the responses. Just so I know, could you tell me why it's impractical and will not work? It seems to me that in theory, I would still be connecting to the tails (as in the henley block method) but instead of connecting into them half way down with a Henley block, I would...

Hi guys I'm fitting a 9.5kw shower to an old style c/u so I'll be using a 2 way shower c/u with an rcd as protection but my question is do I need to come off a suitably rated fuse in the old c/u and what if there isn't a spare or suitable one there? Can I take the phase from the 'load' side of...

yeh i did know that, i've just qualified as a domestic installer and need to get this job checked by the NIC. I've ordered a clamp meter today so when that comes i'll get it sorted. cheers for your advice.

Hello I have recently changed my c/u to a new wylex model as the old one was very dated and on checking it i found just peices of wire in the fuses. I have used connector blocks to connect the old wires (from the circuits in the house) to the new wires (coming out of the new c/u (the new...