Recent content by jimmystavros

Thanks for the reply - is there anything that makes you certain that is the case? It is attached to the end of a shortish wall, and the end of the wall appears to have a pier like construction to have the patio doors attached to it.

I want to remove the wall (blue section). At the moment, a catnic lintel (seen as the black part in the left hand image) spans approx 2.7m between a block work wall in the middle of the house, to this wall (red sections).I have included a close up cutaway from the opposite side of the image...

OK, thanks, I appreciate your input and will look into this.

No, it is out of warranty. It looks like a bridge rectifier takes the AC mains input and converts it to a useable DC output, so it sounds like it is working from mains and then passing that on, making me think that it wouldn't be affect by something further down the line. I am no an expert...

I am pretty sure the 4A fuse on the PCB isnt working. If I just replace it - will it just blow again because of the damaged bridge rectifier, or might it work OK and the fuse just tripped with the initial potential water damage?

Fuse in the wall is working fine, that is a 3A one. Not checked the fuse on the board, I will check that. Will that bridge rectifier cause the system to not work at all? From my understanding, that side half of the board is the mains voltage side.

Turned the system from hot water only, to hot water and central heating the other day. After it working briefly, it has now stopped all together. The display isnt showing a fault or anything - it is just blank. After reading the service guide that came with it - I am confident there is power...

I have an Octavia Cross Head Bath Shower Mixer bought from Toolstation in 2009. It has developed a leak from the diverter knob that switches between the water coming from then tap, or the shower. I have removed the chrome knob, and can clearly see the water leaking out, however I cant...

Octavia Cross Head Bath Shower Mixer