Recent content by jiobloggs

Any recommendations for deck-mounted Thermostatic bath mixer taps that will give a reasonable flow at 0.3 bar?

Hi. I would like a clear/natural, semi gloss/satin finish on new oak internal doors. Any recommendations on a good durable product?

Hoping to insulate single block wall between integral garage and utility room to be used as study. Plan to screw battens to wall to create small cavity and then attach 50 mm foil backed kingspan insulation board. Finish up with plaster board screwed or nailed through board to the batten...

Thanks PrenticeBoyof Derry for the useful link which I have followed up on. Thanks ban-all-sheds for the laugh. She is not just as prickly and irritating as the Glass Fibre.

Upgrading loft insulation. At moment 100mm glass fibre just pulled back a bit from halogen lights protruding through ceiling and open to loft "air". Lights are proper sealed ones for bathrooms. Want to add further 200mm of insulation over joists covering lights. Thinking of making some covers...

Our master bedroom is directly above our intergal garage. The house is having bead cavity wall insulation installed in 50mm cavity ie in garage front and side walls. Back wall is single skin masonry adjoining a living room and other side is empty 50mm cavity double skin wall adjoining the...

Sorry for delay in replying. To clarify boiler, did not fire when CH or HW or BOTH was selected on programmer but did when one of the microswitches in the head was pushed with a small screwdriver. Pump was OK. Have now replaced sync motor and am up and running again. Thanks to all who...

Thanks Tony It looks very like the Honeywell but did not want to buy one and find there were subtle differences. Thought someone on here might know. Mine has stopped working. Not responding at all to call for HW or SH. Could be sync motor but haven't the time to fault find. Is that the...

Hi I have a Pegler Terrier TMPV-22-A 3 port valve with a metal actuator head. Product code 658057. I want/need to replace the actuator but Pegler no longer have any stock of this head. Before I go to the effort of replacing the complete valve I would like to know if any other brands with...