Recent content by jjonesxx

As a side question, can I do anything easy with the base of the outside wall in case bit of damp came in there?

All started with bubbling paint on this bit of wall by the back door. Can anyone advise a novice on a fairly easy fix that might last a while please? Most of paint came off like wallpaper & I've taken a little slightly hollow sounding plaster off. Have concrete, pva, zinsser 123 plus...

OK, reading above I'm quite confident of making do so it works but I'm going to get an electrician in to do it because - 1. It's a bathroom so the water/electric mix kind of freaks me out 2. I don't even know what to buy to contemplate "The connections should be made in a suitable junction...

So in this case, the existing blue wire with black tape is live? That is known as a hot wire? And exisiting black wires are neutral? And using a terminal box rather than several terminal blocks is safety? Thanks for taking the time.

Hello! So I've taken off the old bathroom spotlight which was connected to the black, blue & earth wires. That's the first image. The red wires in a block were tucked away in the wall and not connected. That's the second image. Can anyone explain what the wires I've got are doing and how best...

It worked! Out of curiosity, do the extra 1 way & 2 way both run along to the dimmer switch?

I'm using a Scheider lisse 10ax 3-gang 2-way light switch from Screwfix so figured it was kind of normal. https://www.screwfix.com/p/schneider-electric-lisse-10ax-3-gang-2-way-10ax-light-switch-white/8439j Think that because I now understand the triangle thing, I'm hoping I'll be able to see...

Thanks Mike, actually that's very clear and I'll try it this afternoon. I looked at other posts, google diagrams etc and the triangle layout was mentioned alot but I couldn't SEE it. Now I can and it makes what I've been learning start to make some kind of sense and be a little less scary. Thanks!

Hello! I'm replacing an old 3 gang 2 way switch and could do with some help. I've some attached some pics of the old and the new. Two are one way and the third on the right is a two way. Any help appreciated. PS. Have I even got the right kind of new switch?