Recent content by John Bailey

I think it is the tamper in the bell box should i have set it in any way other than resting on the wall ? the papers in the box did not say it has to be set in any way. No name on the bell the box has been recycled but it is for a 9448 alarm

I have the P I R sorted it was not getting power now how do i remove the hammer and the pad lock from the key pad lights ? i can't find any thing in the book that tells me how to remove these from the key pad.

Hi Guys I have installed a Eaton home alarm 0ne pir is not working at all checked the wiring both on the pir and in the control panel but could not find the problem. Plus i went into programming mode adjusted the leave time keyed in 99 and the arrow and it came up with the hammer and the pad...

Hi Thanks for the reply. Sounds like a good idea but how do i test the PCB switching ?

Hi Guys My Triton shower took a few mins for the water to stop flowing then would drip all day i took the unit out of the loft and changed the solenoid but not the valve and the diaphragm in the stabilising valve reconnected it turned the water on and the water just keeps flowing out of the...