Recent content by JohnHanna

There is no panel. It's tiled everywhere.

Yes. Water overflowed and the water dripped from the ceiling below.

Hello All, There is a leak from the tub which I believe is from the overflow pipe which isn't fit correctly. I've attached some pictures. The problem is there is no way to access this bathtub as it is fully tiled and boxed-in. Is there a way to fix this without removing tiles? It feels like...

I don't want to drill more holes through tiles.

Hello all, I need to replace the wall mounted toiler brush holder. The brackets in the wall are in the picture attached. Any ideas how to find compatible types? Thanks.

Hello all, Basic question as I'm new to this... apologies if it's been discussed before. A simple job. Putting up a shelf. I'm not sure if there are wires above this socket. The stud finder/AC detector isn't working well and gives warnings all over the place! It's a period UK home (newly...

Hello All Trying to stabilise this trellis to the fence. What kind of nails should I use so it doesn’t fall off. With the current setup it falls off whenever a fox climbs it! Also, will I be able to drill through the wooden fence or it can break? Thanks.

Hello, I was doing a fairly simple touchup job for Dulux Brilliant White paint. I used a roller. I can still see the patches in the picture. Any advice? I used a wover or fabric roller not the foam one. Should I try with the foam roller? Thanks.

Sorry one more thing. Where will it go? on the part of the carpet meeting the wood or on the the whole (including curved area) of the ground meeting stairs?

Hi Chris. Thanks for your advice. The flooring (engineered wood) was done before the carpets. There was not enough space under the wood to tuck the carpet in.

Hello All, I installed carpets on the stairs and there is wood on the flooring (ground floor) [pls see picture- the carpet is on the first step of the stairs] It doesn't look very nice and I looked for nosings but none of them serve this purpose. Any ideas? Thanks in advance.

The wall has insulation (foam, pls see picture) Will this need any special fixing?

It didn't completely fall off. The pipes appear to be intact.

Hello, My radiator's come off and detached as shown in the picture. I wanted to know if I will need to prime that area or simply paint over the existing paint? I've never painted before so any basic/starter tips would be welcome. Will I need to detach it completely (that won't be possible!)...

Thank your for this great info. I believe they are plasterboard (not sure) But there is some sort of insulation and I was told to use hollow wall anchors.