Recent content by johyorks

Managed to fix it, I had assembled the switch back together incorrectly after replacing the cord, although it was 'clicking' it wasn't doing it property, the reason was the small cylinder that the cord threads through was upside down, what an ejit! Cheers all for the advice! johyorks

Light is a B&Q - Lulea Flush Fitting 53619/20/21 I have 3 wires coming from the ceiling, blue, brown and green/yellow. The wires fit into the back of the bulb socket/unit which is attached to the casing of the light - earth to the outside of the bulb unit on its own screw with an earth...

Checked the wiring on the light again, seems ok, everything where is should be, I should have checked it worked before I set about the pulley cord, that way I would have known where the problems is. I am still convinced that I something is wrong on the pulley unit, just need someone to confirm...

Cheers, will have a look at the light fitting again and let you know, its a basic ceiling B&Q job, earth, live and neutral, as mentioned all wires where they should be according to the diagram. As per my orginal question, the live wire I am unsure of in the pulley switch unit has an option to go...

I have just changed my bathroom light but it isn't working. I followed all the instructions so pretty confident that all is well with the fitting of the light itself. In addition to the light I also had to chage the pulley cord, however, when I took off the casing one of the wires came loose so...