Recent content by Jonathan Hackett

I’ve just checked and cleared out the drain and both ends of the hose. I found a few bits, but nothing substantial that I would expect would cause a blockage. I’m currently rebuilding the machine. Hopefully that, combined with the general cleaning of the machine will have solved the issue.

Further update, I’ve removed the wiring connected to the pump fitting and lifted up the pump section from the machine base. Here’s some more pictures. I don’t see any obvious blockages, but I’m not too sure exactly what to be looking for. Here’s some more images of the current view.

Ok guys, I’ve made some progress with the issue I had outlined by following a tutorial of a model that was similar to my own. However, there is some information that it hasn’t provided me with. I’ve stripped the machine down to its bare bones now and have access to the motor and other internal...

I’ve found a video of a full service of a similar model, so I’m currently stripping the machine apart. I’ve had to stop as babies need attention, hopefully it’ll prove to be the ticket when I get back to it later on.

Hi everyone, I’m currently experiencing an E22 error on my Hoover Tumble Dryer and wanted to check the condensate pump for blockages, however I could t find any information online that let me know where the pump is located and how to get to it. If anyone could offer any help or point me in the...

Thank you for taking the time to reply Harry, I really appreciate it. I have done some further Googling based on your suggestion and will check this out and see if we can get some life back in the machine. Would you happen to know if I am able to access the Condensate Pump without needing to...

Hello everyone. We’ve had our Hoover Tumble Dryer for little over 3 years now, and with 2 small kids it gets quite a bit of use as you can imagine. Recently I had noticed that the machine wasn’t drying clothes as effectively as it usually did and planned to give the condenser a good clean...