Hi all
Have just re emulsioned a wall in daughters bedroom as time for a colour change and quite a few blisters have appeared as if the paint underneath is lifting from the plaster, seems worse on one wall than another. Wondering what the reason is for this and what to do re the other two...
Hi all
Just wondered if anyone has experience of changing the belt on a 10y old Creda tumble dryer,seems like a daft design that requires drum removal,but from the front or the rear !??
Cheers
Many thanks for that,i did have it wired differently ie red to no,yellow out to com and blue neutral to nc....worked ok for a week though ? Will have another go later when i get home
Hi all.
Have just replaced my old Honeywell stat for a Horstman DRT2 programmable replacement which hopefully having figured the wiring ok worked great for a week.Now when it asks for heat it blows the fuse at the boiler so have had to put the old one back on. Must admit i was expecting only...
Hi all
Last year a patch of tyrolean render came away from the top of my house,is it easy to repair with some new or would some ordinary render and painr sort it ok.
Cheers
The cu is a Mamera rated at 80 Amps,and the water heater (imersion) i'm not sure of its rating but probably no more than 3kw and presently on a 15amp fuse.....
Have 10mm cable installed for 9.5k shower.Cu is currently full with 6 cartridge fuses.Have a shower consumer unit with mcb-rcd protection.Intending pulling the water heater outlet and using for shower cu connection with suitable plug in mcb and adding extra mcb in shower cu(room for one more)for...