Just to put an end to this. The flow that I thought was 'ok' decided to tail off over the last wee while until it was basically a dribble.
Got in from work tonight and thought I'd have a look into it and I thought I saw debris on the bottom of the tank so tried to scrape that off...then i...
Used 300mm flexi to 22mm pushfit. Going from vertical to horizontal with a smooth curve. Didn't see any kinks but they are behind the bath now as the taps are in the middle of the bath.
Not sure really. Cant get the hose connection, for a garden hose, onto the larger head of the bath tap securely enough.
How would i remove any crap that is stuck between the tank and taps?
The bathroom is still not bolted down properly so i could take a feed but it would be a bastard as the main feed is the most rightly pipe of 4 in a row. They are also behind the toilet which is annoying.
parents seem ok with how quick the bath fills when using both taps so they will probably...
Fittted a new bath the other day along with a new mixer tap. I had to extend the old copper pipes and I used the 22mm pushfit items to do so.
The hot water feels perfect but the cold is low compared to how it was on the old taps which had seperate heads.
The hot water comes from a cylinder...
Hi there, we have a UPVC front door that is a few years old now.
Recently it's felt more worn than usual.
If the handle is in it's default position there is free play/slack up adn down and a little you can pull in and out.
Due to the play once the door is unlocked you have to slam the...
Well since all of this has gone by we have changed the pcb and the fan. Now the boiler sounds like it's firing in the right order but doesn't spark up.
Could this be because we had a new gas box outside the house?
I took the cover off and I see the fan at the top left of the boiler but it looks like a pain to get it unplugged as the boiler is quite high on the wall. I see the air pressure switch now too.
This raised an eyebrow though
And this is the fan?
Well my uncle who proves to be awkwardly unhelpful is a british gas man....if I find out it is the fan I'll be getting onto him as it's taking the **** now!
I understand you can't say much due to the legalities of it all so thanks very much for the advice mate.
Cheers.
Aye I can do that and at least I can at least have an idea at what it is. Can't afford to pay someone to come in and say it's something else.
I'll disconnect that and see how it goes tomorow.
Wheres the best place to buy parts near Hamilton/Glasgow city centre?
Ah that's why I've been saying two different kind of switches!
I thought it might not be blowing the fuses simply due to it being the first in a line of components :(.
Where do I find the fan then?
We have this boiler and a while ago it was failing to start and giving of a loud rattle. I had a look around and the rattle was coming from the pcb...so I bought a new pcb and fitted it.
The rattle was gone and it was trying to start....but now fuses are blowing both on the pcb and once on...