Recent content by just017

Can someone explain how I set up a heating schedule in the Honeywell Home app? When I choose the start/stop time and temperature and click save it creates a heating period but then when I click back in the period I just created the times are completely different to that I chose.

Update - I think I've got it working (going to check again when I get home from work). I've used the Switched Live to A + D and the original CH & HW wires to B & E. L N and E are a straight swap. Now when I turn the heating on via the Honeywell app, I see the valve next to the boiler switch...

We used to have a water filter that you put in the fridge but i found that after a month or so with that the water started to smell odd. Perhaps it's just the stagnant water in the filter? Any way of taking the filter out to check it?

It doesn't get the cold feed from the heater tank in the loft does it?

Hi muggles, Yes i have two two-port valves just to the left of the boiler. At the minute i've still got the original thermostat plugged in but it's cranked up to 30 (from what i've read that should stop it being a problem until i've got the T6R working, right? It all lights up as you'd expect...

I've just tried wiring it as follows and still no joy :( 1 - no longer required 2 - B 3 - not used 4 - E 5 - not used 6 - L 7 - N 8 - Earth

Hi guys, I've tried to upgrade my current CH programmer from a Randall 4033 to a Honeywell T6R-HW. I have an Ideal Classic HE15 boiler, hot water tank upstairs in the spare bedroom and header tanks in the loft (hopefully that narrows down the type of CH system I have). The problem i have is...

I thought i'd post this as i was looking for a workshop for quite some time, and stumbled acroos this... a self service / workshop hire in Southend on Sea, Essex. Its called U-Spanner. They have a pretty impressive set of tools there and i think you can use pretty much any tool in the workshop...